KD-128A Air Arm type Drop Tester
Description
All new developing products must undergo several strict testing processes while in designing, manufacturing and packing/ shipping even. Our drop tester will provide data digitizing and analyzing of your drop and striking while the products in transportation. The testing data will help you improve the packing and buffer materials.
Packaged drop test is applied to test the anti-vibration & covering capability of packaging material and the sufficiency of product’s impact-resisting capability regarding packaged products. And use the test result to determine how to improve the packaging design. Free drop test is used to assess the characteristics of product’s free fall from improper actions; and evaluate the required strength and toughness of product under safety conditions.
Repeated free fall test is to simulate object’s condition after normal fall to hard surface.
Specification
Type |
KD-128A |
Bottom plate size (mm) |
850 x 1,260 |
Testing height (mm) |
300 ~ 1300 mm
300 ~ 1800 mm
300~ 2000 mm |
Peak Load(kg) |
60 / 80 / 100 |
Buffer Device |
Hydraulic Buffer |
Level Control Method |
By Line Control |
Outline Dimension (mm) |
850 x 1560 x 2250
850 x 1560 x 2750
850 x 1560 x 2950 |
Weight (kg) |
450 |
Electrical Requirement |
220 V 1f / 5A |
Air Pressure Requirement |
6 |
KD-500
Heavy-load pallet drop tester KD-500
Features
All new developing products must undergo several strict testing processes while in designing, manufacturing and packing/ shipping even. Our drop tester will provide data digitizing and analyzing of your drop and striking while the products in transportation. The testing data will help you improve the packing and buffer materials.
This tester follows CNS 2999 (packing and transporting vessel drop test method) to make design; having varied types of packing and transporting vessels be drop-tested precisely against angle, edge and plain surface.
Tester is off precisely and would never hit the specimen; the hiting plane won’t incline.
Packaged drop test is applied to test the anti-vibration & covering capability of packaging material and the sufficiency of product’s impact-resisting capability regarding packaged products. And use the test result to determine how to improve the packaging design. Free drop test is used to assess the characteristics of product’s free fall from improper actions; and evaluate the required strength and toughness of product under safety conditions.
Repeated free fall test is to simulate object’s condition after normal fall to hard surface.
Specification
Type
|
KD-500
|
Platform Diameter(mm)
|
1,500 x 1,500 / 1,500 x 2,000 / 2,000 x 2,000 / 2,500 x 2,000
|
Test Height (mm)
|
|
Max Load(kg)
|
300
|
Controller
|
专用控制台Special Controller
|
Power Requirement
|
AC 220V 50Hz
|
Gas Requirement
|
>6MPa
|