Ultra Precision Shear Web Loadcell
Morehouse Ultra-Precision Load Cells are accurate to better than 0.005 % of full scale, making them the reference standard of choice for calibration laboratories that want to improve their measurement process.
Common capacities are in stock now!
Morehouse Calibration Load Cells are often the choice for companies that make field measurements in accordance with ASTM E4, ISO 7500, and general field measurement which may include checking the force of a production press.
These load cells are suitable for the following uses:
Applications where alignment is critical
To calibrate other load cells or field force systems
ISO 376 standard meeting Class 1 or better requirements
To calibrate to ASTM E4 with an ASTM Class A verified range of forces of better than 8 % of capacity
Installation into load frames or presses
Critical weighing applications, test stands, and wire tension measurement
A common issue with most load cells is the connector breaking. This often results in repair and/or another calibration of the load cell. This is not a problem with Morehouse load cells.
Morehouse Calibration Load Cells come with a connector protector and are available in capacities from 300 lbf (1 kN) up to 110,000 lbf (500 kN). After 110,000 lbf (500 kN), load cells can be made to order. Since physical weight increases to over 100 lbs after 110,000 lbf, we recommend Morehouse Multi-Column Load Cells for any capacity above 200,000 lbf.
Precision Shear Web Load Cell
With accuracies better than 0.01 % of full scale, Morehouse Precision Load Cells are the standard of choice for field measurements in accordance with ASTM E4 and ISO 7500 and for calibration laboratories that want to do more with less equipment.
Common capacities are in stock now!
When high accuracy and low risk are critical, customers rely on Morehouse Precision Load Cells. These strain gauge type load cells are often the choice for companies making field measurements in accordance with ASTM E4 and ISO 7500. Lower uncertainties allow for fewer standards to maintain, which significantly lowers lifetime ownership costs. A typical Morehouse Precision Load Cell system will cover a verified range of 4 % to 100 % of the system capacity. For example, to achieve a calibration range of 40 lbf through 600,000 lbf, only three load cells would be required: a 600,000 lbf, a 25,000 lbf, and a 1,000 lbf load cell.
These load cells are suitable for the following uses:
Field use where transporting fewer standards provides cost savings
Applications where side load sensitivity is critical
As reference standard used to calibrate other load cells
ISO 376, standard meeting Class 0.5 requirements from 10 % of the loading range or better
To calibrate to ASTM E4 with an ASTM Class A verified range of forces better than 4 % of capacity
A common issue with most load cells is the connector breaking. This often results in repair and/or another calibration of the load cell. This is not a problem with Morehouse load cells.
Morehouse Precision Load Cells come with a connector protector and are available in capacities from 300 lbf (1 kN) up to 110,000 lbf (500 kN). After 110,000 lbf (500 kN), load cells can be made to order. Since physical weight increases to over 100 lbs after 110,000 lbf, we recommend Morehouse Multi-Column Load Cells for any capacity above 200,000 lbf.
Calibration Shear Web Load Cell
With accuracies better than 0.02 % of full scale, Morehouse Calibration Load Cells are the economical strain gauge based standard of choice for field measurements.
Morehouse Calibration Load Cells are often the choice for companies that make field measurements in accordance with ASTM E4, ISO 7500, and general field measurement which may include checking the force of a production press.
These load cells are suitable for the following uses:
Applications where alignment is critical
To calibrate other load cells or field force systems
ISO 376 standard meeting Class 1 or better requirements
To calibrate to ASTM E4 with an ASTM Class A verified range of forces of better than 8 % of capacity
Installation into load frames or presses
Critical weighing applications, test stands, and wire tension measurement
A common issue with most load cells is the connector breaking. This often results in repair and/or another calibration of the load cell. This is not a problem with Morehouse load cells.
Morehouse Calibration Load Cells come with a connector protector and are available in capacities from 300 lbf (1 kN) up to 110,000 lbf (500 kN). After 110,000 lbf (500 kN), load cells can be made to order. Since physical weight increases to over 100 lbs after 110,000 lbf, we recommend Morehouse Multi-Column Load Cells for any capacity above 200,000 lbf.